Product Overview
Yale 5 Ton Single Girder Top-Running Crane Kit
Standard Features
- 5 ton capacity (US Short Tons)
- 33 ft. lift
- 460-3-60, 115 V/C
- 20/3 FPM two speed hoist
- 80/20 FPM VFD 2-step Infinitely Variable
- 3.94 inch (10.01 cm) trolley wheels
- Trolley stops with rubber bumpers
- 50 ft. maximum crane span
- VFD controlled 100 fpm bridge
- 200 MM end trucks with 75" wheelbase
- Mainline contactor & manual disconnect included
- Plug & Play festoon package
- 3 year Manufacturer Warranty
Hoist & Trolley Features & Benefits
- Triple reduction hoist gearing is oil bath lubricated, operating in an oil-tight, cast aluminum gear case.
- 2-Speed Motor with a 4:1 ratio from high to low speed; giving a low speed for precise load handling and a high speed for fast throughput.
- Machined Wire Rope Drum. Quality steel and deep-grooved with a rope guide to help ensure the rope stays in the grooves.
- Reeved to a low-headroom design lower block for minimum headroom and maximum lift.
- Wire rope is secured to the drum with three heavy ductile iron clamps and designed to have three extra wraps of wire rope on the drum with the rope at full extension (low hook).
- Bearing mounted trunnion hook that rotates 360 and swings back and forth 180 for easier load adjustment.
- Upper/lower, geared control circuit hoist motion limit switch.
- An additional block operated upper control circuit limit switch is available as an option.
- Overcapacity limit switch prevents the hoist lifting excessive overloads.
- Two wheels are driven; one on each side of the frame for maximum traction and uniform tracking.
- Hoist and trolley controls are housed in a common NEMA 4/12 enclosure with hoist motion monitor, motor thermal overloads, over capacity limit switch and more.
BRIDGE MOTORS
- Complete with Plug & Play Power Connection Cables
- Motor, Reducer and DC Rectified Brakeare fully assembled for easy installation.
- Shipped ready to install on End Truck with 4 bolt connection.
- Quick-Connect Power Cable from Motor to Control Panel.
- Motors are sized to provide more torque and cooler operationfor superior performance and longer life.
- Direct-Spline connection to the drive wheel.
- Motor built for use with industry standard variable frequencycontrols to provide a wide range of travel speed capacity.
- Totally enclosed oil-bath helical gear bridge reducers.
- Motors are provided with TAS as standard.
- CSA & CE Approved
Single Girder End Truck
- Fitted with 2 removable (not welded) Rail Sweepsfor easier inspection of the wheels.
- Heavy Duty Rubber Bumpers come standard.
- 2 oversized Hand Holes allow for easy access to connection plate bolts.
- Rotating Axle Driver and Trailer Wheels – No exposed gearing.
- Wheels are flat tread machined and hardened to 300-320 BHN – the industries hardest – and can run on ASCE or Square Bar Rail.
- Top and Side Girder Connection Plates come standard.
- Girder Connection Plates are bolted, not welded, to allow the girder to be easily removed for shipping.
- Wheelbase: 90"
- Constructed from Heavy Wall ASTM Structural Tube to handle a broader range of capacities.
Control Panel
- Plug & Play cables connect to bridge motors, hoist & trolley, power and pendant control for easy assembly.
- Standard Variable Frequency Control provides controlled acceleration and deceleration for smoother operation, reduced load swing, and extends the life of the drive train.
- NEMA 4/12 Enclosure.
- Meets NEC.
- Fusing, Manual Disconnect and Mainline Contactor.
- Control Panel Components are CSA approved.
Festoon System
- Easy quick connect plugs requires no special tools or skills to “wire up” a bridge crane.
- Connection housings are durable metal with spring loaded snap connections. No plastic housings to break or long screws or loose gaskets to contend with.
- Flat cables and plugs are CSA approved.
Pendal Control
- Plug & Play connection make installation and maintenance quick and easy, eliminating the need of an electrician and minimizing downtime.
- Simplified 8 button operation for all movement.
- UL Listed and CSA approved.
Call 1-800-509-6131 for freight quote, this is large oversized shipment but we have great rates from C.H. Robinson.
